Techno Life, Micromax New Version Official Firmware, Winmax official firmware, Nokia Flash File, WhatsApp Messenger, Lenovo, huawei, xiaomi, samsung galaxy

Cari Blog Ini

Diberdayakan oleh Blogger.
Minggu, 21 Oktober 2012

How to Set Up a Timer in PIC16F877A

How to Set Up a Timer in PIC16F877A - these days more and more blogs that talk about technology, including blogs Techno Life but we are very experienced in this case because we have been there from a few years ago always present information about techno for you, well now we are about How to Set Up a Timer in PIC16F877A hopefully the information we will convey can answer your question to google, please see:

Articles : How to Set Up a Timer in PIC16F877A
full Link : How to Set Up a Timer in PIC16F877A

You can also see our article on:


How to Set Up a Timer in PIC16F877A



We have Three Timers in PIC16F877A , and here we have a look to how to setup the TIMER0 in PIC16F877A using HiTech C programm 




• To set up the timer, one must first disable interrupts so that an interrupt doesn’t occur when the timer expires.
• Then, enable the timer and assign the prescaler to the timer.
• Establish the prescaler value, and finally, load the timer register.
 Whenever the timer expires, the T0IF bit in the INTCON register will be set.
• We must clear this bit, reload the timer register, and then execute the code that is to be done at this time.

In code, the setup portion might look something like:
########################## IN ASSEMBLY PROGRAM ###########################
banksel INTCON
bcf INTCON,T0IE ; Mask timer interrupt
banksel OPTION_REG
bcf OPTION_REG,T0CS ; Enable timer
bcf OPTION_REG,PSA ; Prescaler to timer
bcf OPTION_REG,PS2 ; \
bsf OPTION_REG,PS1 ; >- 1:16 prescale
bsf OPTION_REG,PS0 ; /
movlw D’100’ ; Timer will count
movwf TMR0 ; 156 (256-100) counts

######################## IN HITECH C PROGRAM #######################################
OPTION_REG= 0x0F;
  TMR0=0x0F;
  while(TMR0IF=0);
  TMR0IF=0;
##################################################

• Clearly, the individual bits in the option register could all be set with a single store.
• If we didn’t care about the RB0 interrupt, the weak pullups, or the transition of RA4, then instead of five bit manipulations we could have said:
• movlw B’10000011’ ; Set up prescaler and
• movwf OPTION_REG ; timer

The execution loop might look something like:



main:
    btfss INTCON,T0IF ; Did timer overflow?
    goto main ; No, hang around some more 
    movlw D’100’ ; Timer will count
    movwf TMR0 ; 156 (256-100) counts
    bcf INTCON,T0IF ; reset overflow flag
    call DoCode ; Execute main code
    goto main ; Go back and wait





information How to Set Up a Timer in PIC16F877A has been discussed

hopefully the meaning of How to Set Up a Timer in PIC16F877A that we write can be useful for you in adding insight about gadgets.

you just finished reading the article titled How to Set Up a Timer in PIC16F877A if you want to bookmark or share your links use the link https://lifeandeating.blogspot.com/2012/10/how-to-set-up-timer-in-pic16f877a.html do not forget to go back to this blog if you want to get the latest information about gadgets.

Tag :
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : How to Set Up a Timer in PIC16F877A

0 komentar:

Posting Komentar