Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution - these days more and more blogs that talk about technology, including blogs
Techno Life but we are very experienced in this case because we have been there from a few years ago always present information about techno for you, well now we are about Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution hopefully the information we will convey can answer your question to google, please see:
Articles :
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
full Link :
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
Article Nokia C1-01,
You can also see our article on:
Nokia C1-01 LCD Screen Display Problem Jumper Ways Solution
This is the Nokia C1-01 Solution for an abnormal display problem, such as blank or empty
screen, garbled or dark
screen display. This solution may works if you already tried
installing a new
LCD screen module and tried updating the device
firmware but still the screen went wrong.
Refer to the solution below and do trace the LCD soldered pads connector down to the corresponding components such as the resistors and filter coils. The resistors has as resistance value of 22o ohms each. The VAUX is 2.8 volts and the VIO is 1.8 volts, you may also check these voltages.
This also includes the connection line paths of the LCD backlight LED, to fix if the white LED at the back of the LCD doesn't turns ON and shows a dark display.
0 komentar:
Posting Komentar