Techno Life, Micromax New Version Official Firmware, Winmax official firmware, Nokia Flash File, WhatsApp Messenger, Lenovo, huawei, xiaomi, samsung galaxy

Cari Blog Ini

Diberdayakan oleh Blogger.
Kamis, 20 Maret 2014

Nokia X6 Camera Failure Problem Solution - hardware repair solution

Nokia X6 Camera Failure Problem Solution - hardware repair solution - these days more and more blogs that talk about technology, including blogs Techno Life but we are very experienced in this case because we have been there from a few years ago always present information about techno for you, well now we are about Nokia X6 Camera Failure Problem Solution - hardware repair solution hopefully the information we will convey can answer your question to google, please see:

Articles : Nokia X6 Camera Failure Problem Solution - hardware repair solution
full Link : Nokia X6 Camera Failure Problem Solution - hardware repair solution
Article Nokia X6,

You can also see our article on:


Nokia X6 Camera Failure Problem Solution - hardware repair solution

Before using or applying this solution ensure to restore,flash and update,
the device firmware on Nokia X6. Oftentimes camera failure is cause by an interrupted firmware, restoring or flashing it back again will fix the problem. But
if that does not solved the problem you may then proceed to hardware repair troubleshooting, especially
if the device suffered from wet damaged and accidentaly dropped by the user.
The problem may possibly lies on faulty hardware components.



This solution below shows the main camera circuit on Nokia X6 and can be used as a guide to fix and repair camera hardware failure issues.


Nokia X6 Camera Hardware Problem Solution
nokia X6 camera repair solution
Camera Repair Tips:
a) Try to replace a new camera replacement module.
b) Check and clean the camera connector.
c) Do supply voltage measurement on corresponding camera supply voltages (see solution above). You can check this voltages while trying to enable the camera in ON condition.
    There are three voltage converters circuit that feeds voltage to enable the camera. This voltage  ranges are as follows, 1.8volts, 2.8volts and 1.3volts  DC voltages.
     This voltages are converted by a DC to DC converters chip. The chips converts the Battery voltage which is 3.7 volts and drop it down or minimize it to 1.8, 2.8 and 1.3 DC voltage.
  So, ensure that the battery supply voltage is properly feeds to each of the DC converter chips.
If  the battery supply voltage is present and still there is no voltage output you can read on each chip, you may then check or replace the DC to DC converter IC's.

d) If all voltages reading is working good and no problems found, but the problem still exists, you may then proceed to rework or replace the Camera Accelerator IC this chip holds and control the camera data signals before it feeds to the application processor IC.



information Nokia X6 Camera Failure Problem Solution - hardware repair solution has been discussed

hopefully the meaning of Nokia X6 Camera Failure Problem Solution - hardware repair solution that we write can be useful for you in adding insight about gadgets.

you just finished reading the article titled Nokia X6 Camera Failure Problem Solution - hardware repair solution if you want to bookmark or share your links use the link https://lifeandeating.blogspot.com/2014/03/nokia-x6-camera-failure-problem.html do not forget to go back to this blog if you want to get the latest information about gadgets.

Tag : ,
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Nokia X6 Camera Failure Problem Solution - hardware repair solution

0 komentar:

Posting Komentar